Positioning the Alien 05 Recessed beam
Do not tilt the sphere on an Alien 05
Recessed so that the light points into the
fixture as the build-up of heat may damage
the fixture. Forcing the sphere into this
position might also strain the cables within
the fixture.
If installing as an up-light, rotate the sphere
through 180° (A) and adjust the upward
angle (B) if necessary, so that the motor
vent is below the lamp as described in
"Orientation in up-light installations" on page
12.
Positioning the Alie n 0 5 S t e m M o u n t b e a m
Rotate the mounting bracket and tilt the sphere to the correct position and
lock them into position using a 2.5 millimeter Allen wrench.
Positioning the Alien 05 Eyeball beam
Alien 05 Eyeball models have a:
• Tilt stop to prevent over-rotation of the sphere
32
General operation
B
A