Martin Alien 05 User Manual page 25

4 Remove the snap ring from the end of the Arm using a pair of retaining ring
pliers. Slide the Arm through the hole on the bracket of the Alien 05 Stem
Mount head and replace the snap ring.
5 If you have attached a 600 mm long arm then attached the cable extension
that is supplied to the cable on the Alien 05 Stem Mount head.
6 Slide the base cover over the arm.
7 Thread the power and data cable up through the arm and screw the arm
cover into place using a small Phillips screwdriver.
Installing an Alien 05 Stem Mount
Base cover
Arm cover
25