Table of Contents
Advertisement
3 Once the cables are connected, insert the Alien 05 into the mounting hole.
4 Using a 3 mm Allen wrench, tighten the screws to lock the fixture in place.
Do not overtighten.
R e m o v i n g t h e A l i e n 0 5 Re c e s s e d
Once installed it is not recommended that you remove an Alien 05
Recessed unless absolutely necessary.
To remove an Alien 05 Recessed:
1 Remove the 3 Allen screws in the mounting ring (shown in the previous
section) using a 3 mm Allen wrench.
2 Remove the fixture from the wall/ceiling panel.
During this process, particularly if the fixture is wall mounted, you might lose
one or more of the three clamp nuts (P/N 08074102) and rubber bands (P/N
34420503) that hold the fixture firmly in place when mounted. Should this
occur, replacement parts can be ordered from your Martin dealer.
16
Installing an Alien 05 Recessed
Advertisement
Table of Contents
