Table of Contents
Advertisement
Installati on using the standard configuration
1 Fasten the base plate to the mounting surface using 5 mm mounting
hardware. We recommend that you use the two keyholes first and then
fasten the base plate into place using the third hole.
2 Lay the network cables between the 05 Driver/05 Repeaters and the data
terminal (A) on the Base. See "Laying control network cables" on page 8.
Use CAT5 network cables and if the lamp is to be daisy-chained to a
subsequent lamp, connect another CAT5 network cable for the link to the
next fixture. Note that it does not matter which network socket on the data
terminal is used.
B
C
3 Connect the transformer on the Base to power at the terminal (C). See
"Connecting transformers to a power supply" on page 11 of this user
manual. Anchor the power cable using the clamp (B).
24
A
A
Installing an Alien 05 Stem Mount
Ø5.5mm
Ø11.5mm
Advertisement
Table of Contents
