Martin Alien 05 User Manual page 8

Hide thumbs Also See for Alien 05:

Table of Contents

ft.) Solid or stranded cable may be used; see page 44 for

specifications.

Oracle

Laying control network cables

Lay network cables from as many of the 05 Driver's, or 05 Repeater's, six

output channel sockets as is necessary to the Alien 05 mounting positions.

Start with the locations closest to the 05 Driver or 05 Repeater.

If you are connecting multiple Alien 05s in daisy chains, run cables from the

first positions in the chain to the next ones. In this way you will connect the

first Alien 05 luminaire to the second Alien 05 luminaire, the second

luminaire to the third, and the third to the fourth. The connection order is not

important but keep the cable run from any single 05 Driver or 05 Repeater to

the last luminaire in its chain of connected luminaires to less than 40 meters

(131 ft.). The cable sockets on the Alien 05s are identical: either one may be

used for input.

Configuring an Alien 05 system

DMX control device

Alien 05 luminaires

Table of Contents