Martin Alien 05 User Manual page 37

4 Slide the lamp out of its sprung
holder in the sphere.
5 Gently remove the old lamp from
the socket.
6 Holding the new lamp by its glass
base, insert it firmly and squarely
into the lamp socket.
7 Gently insert the lamp under the
sprung holder inside the sphere.
8 Reconnect the data (D) and power
(P) connectors (A).
9 Grasp the wire clips (B) and insert
the Alien 05 back into the Halo
recessed fixture housing (C).
B
10 Reapply power.
Service
A
C
37