Table of Contents
Advertisement
configuration is not intended for mounting on a vertical surface such as a
wall.
Base
Base cover
Cover ring
Bracket
Head
Arm
Snap ring
Arm cover
Standard configuration
Note that in either configuration that power and data cables can be
connected to the base either through the three holes in the side of the
Base cover or through the hole in the center of the base.
Before you start, ensure that the components are disassembled as shown
in the previous exploded views. Then perform the appropriate installation
procedure:
• "Installation using the standard configuration" on page 24, or
• "Installation using the reversed configuration" on page 27
Reversed configuration
Advertisement
Table of Contents
