3.
FUNCTIONAL OVERVIEW
3.1. Front Panel
* The unit can also be turned on by pressing this button.
1. Disc tray
2. Infrared sensor window
3.
(OPEN/CLOSE) button*
4.
(PLAY/PAUSE)button*
• Press to start playback or resume playback.
• During playback, press to pause playback.
C Caution
•
Do not connect any device other than USB Memory Stick or USB card reader into the USB Input. (e.g. PC, external
HDD, digital camera, keyboard, mouse, etc.)
•
When connecting a USB Memory Stick, connect it directly to the USB Input. Do not use a USB extension cable.
D Note
•
Due to new ENERGY STAR
inactivity and enter standby mode after 25 minutes of inactivity.
3.2. Rear Panel
1. AC power cord
C Caution
•
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the
unit.
•
This unit does not have a TV RF modulator.
EN - 6
1
®
requirements, this unit will automatically turn on the screen saver after 5 minutes of
1
2
HDMI OUT
2
3* 4*
5 6
5.
(POWER-ON) button
6. Power-On indicator
• Flashes while unit is starting up.
• Dims and flickers when IR remote signal is received.
7. USB Input
2. HDMI OUT jack
7