Led Indicators - Extreme Networks Altitude 4760 Series Installation Manual

LED Indicators

LED Indicators
The Altitude 4760 Series Access Point has six LEDs on the top of the Access Point housing.
The Access Point utilizes two different colored lights below each LED. Only one light
displays within an LED at any given time. Every light within each LED is exercised during
startup to allow the user to see if an LED is not functioning. The LEDs turn on and off
while rotating in a circular pattern. Since two LEDs feed each light pipe, the pattern is from
left to right (LEDs 1 through 6), then right to left (LEDs 6 through 1).
The functionality and display of the top housing LEDs are shown in the following sections.
Altitude™ 4760 Series Access Point Installation Guide
23