Extreme Networks Altitude 4760 Series Installation Manual page 20

Altitude 4760 Series Access Point Ports and Connections
The Ethernet cable from the PoE device (if used) connects to the GE1/POE port on the unit.
The GE2 port on the unit can be used if a second data connection for an external device
(e.g. surveillance camera) is required. Ensure the GE2 WAN port has been configured to
permit an attached external device during the configuration process.
When making connections using these ports, a properly rated RJ45 connector is required.
One weatherproof RJ45 plug kit is provided with each Access Point. When connecting
cables to the Altitude 4760 Series Access Point Ethernet ports, follow the instructions in the
connector packaging and tighten the connectors to create a weatherproof seal. Shielded
cables are required.
Altitude™ 4760 Series Access Point Installation Guide
20