Table of Contents
Advertisement
The Initial Setup Wizard
26 Refer to the Country and Time Zone field to set the following device deployment
information:
Location - Define the location of the Access Point. The Location parameter acts as a
●
reminder of where the AP is deployed within the Extreme Networks managed
wireless network.
Contact - Specify the contact information for the administrator. The credentials
●
provided should accurately reflect the individual responding to service queries.
Country - Select the Country where the Access Point is deployed. The Access Point
●
prompts for the correct country code on the first login. A warning message also
displays stating an incorrect country setting may result in illegal radio operation.
Selecting the correct country is central to legal operation. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF
signal strength that can be transmitted. This is a required parameter.
Time Zone - Set the time zone where the Access Point is deployed. This is a required
●
parameter. The setting should be complimentary with the selected deployment
country.
27 If an NTP resource is unavailable, set the System Date and Time (calendar date, time, and
AM/PM designation).
28 Optionally enter the IP address of a server used to provide system time to the Access
Point. Once the IP address is entered, the Network Time Protocol (NTP) functionality is
engaged automatically for synchronization with the NTP resource.
29 If an NTP resource is unavailable, set the System Date and Time (calendar date, time, and
AM/PM designation).
30 Optionally, enter the IP address of a server used to provide system time to the Access
Point. Once the IP address is entered, the Network Time Protocol (NTP) functionality is
automatically engaged for synchronization with the NTP resource.
31 Select Next. The Initial AP Setup Wizard displays the Summary and Commit screen to
summarize the screens (pages) and settings updated using the Initial AP Setup Wizard.
No user intervention or additional settings are required within this screen. It is a means
of validating the configuration before its deployed.
Altitude™ 4760 Series Access Point Installation Guide
61
Advertisement
Table of Contents
