Led Indicators - Extreme Networks AP-7562 Installation Manual

LED Indicators

AP-7562 Access Points have LED activity indicators on the front of the enclosure. The LEDs
provide a status display indicating error conditions, transmission, and network activity for
the 2.4 GHz radio (green) and the 5 GHz radio (amber).
Task
Unconfigured
Radio
Normal
Operation
Firmware
Update
Locate AP
Mode
AP-7562 Installation Guide
2.4 GHz Activity LED
(Green)
On
• If this radio band is
enabled:
Blink at 5 second
interval
• If this radio band is
disabled:
Off
• If there is activity on
this band:
Blink interval at 1
time per second
Off
LEDs blink in an
alternating green, red
and amber pattern
using an irregular blink
rate. This LED state in
no way resembles
normal operating
conditions
5 GHz Activity LED
(Amber)
On
• If this radio band is
enabled:
Blink at 5 second interval
• If this radio band is
disabled:
Off
• If there is activity on this
band:
Blink interval at 1 time
per second
On
LEDs blink in an alternating
green, red and amber
pattern using an irregular
blink rate. This LED state in
no way resembles normal
operating conditions.
Introduction
20