Ap510I Led Status Indicators; Led Location - Extreme Networks ExtremeWireless AP510i Installation Manual

Overview
Table 1: AP510i back ports description
Callout
1
2
3
4
5
Note
On the access point, there is a hole near the Kensington lock in the top-rear that can be used
as a provision for safety hanger. There is also a hole on the rear of the access point that can be
used as a safety hanger provision.
The safety hanger can be a wire or a cable that is used to secure the access point and keep it
from falling in case ceiling and wall installation using the main mounting bracket fails.
The Kensington lock can use a 3 mm diameter safety hangar cable and the rear hole can
accommodate a 2.9 mm diameter safety hanger cable.

AP510i LED Status Indicators

LED description and status indicators.

LED location

The AP510i LEDs are located on the front face of the access point but are not visibly marked.
Description
Kensignton lock
12V DC power supply
Console port (yellow)
LAN 2 (GE) (black)
LAN1 (5 GE) (purple)
ExtremeWireless™ AP510i Access Point Installation Guide
AP510i LED Status Indicators
9