Altitude 4760 Series Access Point Hardware Mounting and Installation
Altitude 4760 Series Access Point Hardware
Mounting and Installation
It is recommended to use the Altitude 4760 Series Access Point mounting bracket kit
(KT-147407-01) for most deployments. When a standoff distance is required for a pole
mounted or wall mounted installation, use the extension arm kit (KT-150173-01).
The following sections detail the installation procedure for deploying an
4760 Series Access Point
Mounting Bracket Kit
The Altitude 4760 Series Access Point mounting bracket kit (KT-147407-01) includes the
Access Point Bracket (left), Angle Adapter Bracket (center), and Pole Mount Bracket (right)
sections.
The Access Point Bracket and the Angle Adapter Bracket can be adjusted to rotate (plus or
minus 15 degrees) and tilt (up to 45 degrees) during installation to orient the unit for
optimal positioning.
The following ancillary hardware to assemble the mounting bracket sections is included in
the kit.
Description
M6 serrated hex flanged screws
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt
Altitude™ 4760 Series Access Point Installation Guide
:
Quantity
8
2
2
Altitude
26