Altitude 4760 Series Access Point Ports and Connections
As with the two radio models, R1 ports relate to the software configured radio 1 settings.
When mounting antennas to connectors marked R2-A, R2-B and R2-C, the antenna ports
relate to the software configured radio 2 settings. Care must be taken to provide the correct
antenna for the operating band of each port.
Ports R3-A and R3-B are reserved for the sensor radio. An appropriate multi-band antenna
should be mounted on the unit for sensor operation.
NOTE
The sensor radio does not function as a WLAN data radio.
WARNING!
Antenna ports where no antenna is mounted must be properly terminated using an approved
IP67 terminator.
Altitude™ 4760 Series Access Point Installation Guide
18