Brother DCP-8110DN Service Manual page 93

Error code 8F01
Size mismatch
Reload correct paper in #T.
When copying from the MP tray, the size of paper set in the MP tray does not match the size
specified by the driver.
Error code 8F02
Size mismatch
Reload correct paper in #T.
When copying from the Paper tray 1, the size of paper set in the Paper tray 1 does not match
the size specified by the driver.
Error code 8F03
Size mismatch
Reload correct paper in #T.
When copying from the Paper tray 2, the size of paper set in the Paper tray 2 does not match
the size specified by the driver.
Error code 9000
Size mismatch
Load #S paper in #T and press Start.
When printing from the MP tray, the size of paper set in the MP tray does not match the size
specified by the driver.
Error code 9100
Size mismatch
Load #S paper in #T and press Start.
When printing from paper tray 1, the size of paper set in paper tray 1 does not match the size
specified by the driver.
Error code 9200
Size mismatch
Load #S paper in #T and press Start.
When printing from paper tray 2, the size of paper set in paper tray 2 does not match the size
specified by the driver.
<User Check>
• Match the size of the paper set in each tray to the driver instruction, or match the driver
instruction to the size of the paper set in each tray.
Step
Registration rear actuator
1 caught in some sections of the
machine
Registration rear sensor failure
2
3 Main PCB failure
Cause
Reattach the registration rear actuator.
Replace the registration front/rear sensor PCB
ASSY.
Replace the main PCB ASSY.
2-48
Remedy
Confidential