Brother DCP-8110DN Service Manual page 104

Error code BA00
This error does not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1 Main PCB failure
Error code BB00
Scanner Error
-
A white level not within the standard was scanned when function code 55 was executed.
Step
First side CIS unit or second
1
side CIS unit failure
2 Main PCB failure
Error code BC00
Scan Unable BC
See Troubleshooting and routine maintenance chapter in User's Guide.
Although operation was retried due to error AC00 that occurred while scanning the fax, white
or black correction data for the second side CIS was not within the correct range.
Step
Incorrect correction data for
1
second side CIS
2 Second side CIS unit failure
3 Main PCB failure
Error code BD00
Scanner Error
-
A black level not within the standard was scanned when function code 55 was executed.
Step
First side CIS unit or second
1
side CIS unit failure
2 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the first side CIS unit or second side
CIS unit.
Replace the main PCB ASSY.
Cause
Execute function code 55.
Replace the second side CIS unit.
Replace the main PCB ASSY.
Cause
Replace the first side CIS unit or second side
CIS unit.
Replace the main PCB ASSY.
2-59
Remedy
Remedy
Remedy
Remedy
Confidential