Brother DCP-8110DN Service Manual page 67

Error
Problem
codes
Detected that the first side CIS
B000 flat cable or second side CIS flat
cable was not inserted correctly.
B100 An unidentified error occurred.
B200 An unidentified error occurred.
B300 An unidentified error occurred.
B400 An unidentified error occurred.
B500 An unidentified error occurred.
B600 An unidentified error occurred.
The voltage value was above the
B700
upper limit during scanning.
The voltage value was below the
B800
lower limit during scanning.
The white level does not increase
B900 during scanning although the light
intensity was increased.
BA00 An unidentified error occurred.
A white level not within the
BB00 standard was scanned when
function code 55 was executed.
Although operation was retried due
to error AC00 that occurred while
BC00 scanning the fax, white or black
correction data for the second side
CIS was not within the correct range.
A black level not within the
BD00 standard was scanned when
function code 55 was executed.
BE00 An unidentified error occurred.
The second side document
scanning position sensor detected
BF00 that the ADF was unable to
duplex-feed the document
because the document is too long.
The new toner sensor could not
C000 detect the new toner cartridge
correctly.
C100 An unidentified error occurred.
C200 An unidentified error occurred.
C300 An unidentified error occurred.
C400 An unidentified error occurred.
C500 An unidentified error occurred.
C600 An unidentified error occurred.
There is insufficient memory to
C700
expand PC-print data.
Refer Error
to: codes
The memory size allotted for
2-58 C800 Secure Print was exceeded
when saving Secure Print data.
A USB device not within the
specifications is connected to
2-58 CA00
the USB terminal, resulting in
overcurrent.
2-58 CB00 An unidentified error occurred.
2-58 CC00 An unidentified error occurred.
2-58 CD00 An unidentified error occurred.
2-58 CE00 An unidentified error occurred.
2-58 CF00 An unidentified error occurred.
An error occurred while
2-58 D000
initializing the touch panel.
An error occurred while
2-58 D100
initializing the modem.
2-58 D200 An unidentified error occurred.
2-59 D300 An unidentified error occurred.
2-59 D400 An unidentified error occurred.
2-59 D500 An unidentified error occurred.
2-59 D600 An unidentified error occurred.
2-60 D700 An unidentified error occurred.
2-60 D800 An unidentified error occurred.
2-60 D900 An unidentified error occurred.
2-61 DA00 An unidentified error occurred.
2-61 DB00 An unidentified error occurred.
2-61 DC00 An unidentified error occurred.
Fuser unit error (except error
2-61 DD00 codes 6A00 to 6F00, 7600,
7800, DE00, and E200)
When the center thermistor of the
fuser unit is higher than the idle
2-61 DE00 temperature, the side thermistor
detected a temperature lower than
the specified temperature.
2-61 DF00 An unidentified error occurred.
An error occurred in the ROM
2-61 E000
check sum.
2-22
Refer
Problem
2-61
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-62
2-63
2-63
2-64
2-64
Confidential
to: