Error Cause And Remedy - Brother DCP-8110DN Service Manual

4. TROUBLESHOOTING
LCD displays shown below are described based on the 5-line model. Only the first line is
applicable to color LCD models.
4.1

Error Cause and Remedy

Error code 0B00
---
There was no response from the panel for the specified time for any reason.
Step
1 Panel PCB failure
2 Touch panel PCB failure
3 Main PCB failure
Error codes 0C01/0C02/0C03/0C04
Log Access Error.
Log registration failed.
<User Check>
• Follow the User's Guide to set the network again.
Step
1 Main PCB failure
Error code 0D00
This error does not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1 Main PCB failure
Cause
Replace the panel PCB ASSY.
Replace the touch panel PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-31
Remedy
Remedy
Remedy
Confidential