Disassembly Procedure (Lt Unit); Paper Tray 2 - Brother DCP-8110DN Service Manual

10. DISASSEMBLY PROCEDURE (LT UNIT)

10.1 Paper tray 2

(1) Remove the two taptite bind B M4x12 screws from paper tray 2.
(2) Lift the plate to remove "A" on the T2 tray indicator from the plate, remove the four
bosses, and remove the T2 tray cover from paper tray 2.
Paper tray 2
Plate
(3) Release the two hooks on the T2 separation pad ASSY from paper tray 2.
(4) Push both arms of the T2 separation pad ASSY in the direction of the arrows to remove
both pins, and remove the T2 separation pad ASSY from paper tray 2.
(5) Remove the T2 separation pad spring from the T2 separation pad ASSY.
T2 separation pad ASSY
Bosses
T2 tray indicator
"A"
Hook
Hook
Arm
Pin
Fig. 3-146
Arm
Pin
T2 separation
pad spring
Fig. 3-147
3-117
Taptite bind B M4x12
T2 tray cover
Bosses
Paper tray 2
Hooks
Confidential