Brother DCP-8110DN Service Manual page 304

WSW No.
WSW35 Function setting 13
WSW36 Function setting 14
WSW37 Function setting 15
WSW38 V.34 transmission settings
WSW39 V.34 transmission speed
WSW40 V.34 modem settings
WSW41 ON-duration of the scanning light source
WSW42 Internet mail settings
WSW43 Function setting 16
WSW44 Speeding up scanning-1
WSW45 Speeding up scanning-2
WSW46 Monitor of power ON/OFF state and parallel port kept at high
WSW47 Switching between high- and full-speed USB
WSW48 USB setup latency
WSW49 End-of-copying beep and print in black
WSW50 SDAA settings
WSW51 Function setting 17
WSW52 Function setting 18
WSW53 Function setting 19
WSW54 Function setting 20
WSW55 Interval of time required for the developing bias voltage correction
WSW56 Function setting 21
WSW57 Function setting 22
WSW58 Function setting 23
WSW59 Function setting 24
WSW60 Function setting 25
WSW61 Scanning light intensity to judge to be stable 1
WSW62 Scanning light intensity to judge to be stable 2
WSW63 Setting clock type / Demo print mode / Font support for Israel
WSW64 Setting the language / default paper size
WSW65 Setting the paper support
WSW66 Reserved (Change of the setting is prohibited)
WSW67 Reserved (Change of the setting is prohibited)
WSW68 Reserved (Change of the setting is prohibited)
WSW69 Reserved (Change of the setting is prohibited)
WSW70 Reserved (Change of the setting is prohibited)
WSW71 Reserved (Change of the setting is prohibited)
WSW72 Reserved (Change of the setting is prohibited)
WSW73 Reserved (Change of the setting is prohibited)
WSW74 ADF stop control
WSW75 Setting the document count method for duplex scanning
Set the limit for the number of documents to be ejected in reverse order
WSW76
for simplex scanning
Set the limit for the number of documents to be ejected in reverse order
WSW77
for duplex scanning from ADF
WSW78 Recording stop function when the drum reaches the end of life
Function
5-9
Confidential