Registration Clutch / T1 Clutch - Brother DCP-8110DN Service Manual

9.25 Registration clutch / T1 clutch

(1) Release the registration clutch harness and the T1 clutch harness from the securing
fixtures.
(2) Remove collar 6, and remove the registration clutch from the machine.
(3) Release the hook, and remove the T1 clutch from the machine.
Note:
• Be careful not to damage the hook on the T1 clutch.
Registration clutch harness
Collar 6
Harness routing: Refer to
Registration clutch
T1 clutch harness
Hook
Fig. 3-115
"2.Relay front PCB
3-86
T1 clutch
ASSY".
Confidential