Brother DCP-8110DN Service Manual page 316

LCD
Orientation Changes the printing direction. Valid for printing from the computer.
P-Pos X-Offset Sets the print position offset in the X (landscape) direction. Valid for printing
from the computer. When X-Offset is set on the computer, the setting on the
computer supersedes the setting on the LCD.
P-Pos Y-Offset Sets the print position offset in the Y (portrait) direction. Valid for printing
from the computer. When Y-Offset is set on the computer, the setting on the
computer supersedes the setting on the LCD.
AutoFF Sets ON or OFF for AutoFF (automatic form feed). Valid for printing from the
computer.
AutoFF Time Sets the time until timeout is issued when AutoFF is set to ON.
FF Surpress Sets whether to skip blank pages. Valid for printing from the computer. On
or Off for the blank data when copying or faxing cannot be changed in this
setting.
Auto LF Sets the auto linefeed.
Auto CR Sets the auto carriage return. Adds CR to the LF code.
Auto WRAP Sets the auto CRLF at the print width.
Auto Skip Sets whether to skip at the backend or tip of paper. Adds a blank space.
Left Margin Sets the column space at the left side.
Right Margin Set the column space at the right side.
Top Margin Sets the space at the top.
Bottom Margin Sets the space at the bottom.
Lines Sets the number of lines in the PCL.
Error Print Sets the Error Print in the event of a BR-Script 3 error.
Detail description
5-21
Confidential