Brother DCP-8110DN Service Manual page 66

Error
Problem
codes
When printing from the MP tray,
the size of paper set in the MP
9000
tray does not match the size
specified by the driver.
When printing from paper tray 1,
the size of paper set in paper
9100
tray 1 does not match the size
specified by the driver.
When printing from paper tray 2,
the size of paper set in paper
9200
tray 2 does not match the size
specified by the driver.
When printing from the MP tray,
the MP paper empty sensor
9300
detected that there was no paper
set in the MP tray.
When printing from paper tray 1,
the T1 paper feed sensor
9400
detected that there was no paper
set in paper tray 1.
When printing from paper tray 2,
the T2 paper feed sensor
9500
detected that there was no paper
set in paper tray 2.
When printing with the tray designation
set to AUTO, the MP paper empty
sensor, T1 paper feed sensor and T2
9600
paper feed sensor all detected that
there was no paper set in the MP tray,
paper tray 1 and paper tray 2.
When printing from paper tray 1,
a paper size not supported for
9700
paper tray 1 was specified from
the driver.
When printing from paper tray 2,
a paper size not supported for
9800
paper tray 2 was specified from
the driver.
A paper size not supported for
9900 duplex printing was specified
from the driver.
There is no paper set in the MP
9A00 tray while feeding from the
Manual is fixed.
9B00 An unidentified error occurred.
9C00 An unidentified error occurred.
9D00 An unidentified error occurred.
9E00
An unidentified error occurred.
9F00
The T1 paper feed sensor detected
9F01 that paper has run out during
faxing or printing a list or report.
Refer Error
to: codes
Image processing cannot be completed
correctly because the number of pixels
2-48 A000 required for image processing is
insufficient in the scanned data for the
second side of the document.
The front cover sensor detected
2-48 A100
that the front cover was open.
The first side document scanning
position sensor detected that the
2-48 A200
document length was 90 cm or
more while scanning the document.
The first side document scanning
position sensor has not detected the top
2-49 A300
of the document even after the document
has been fed for the specified distance.
The ADF cover sensor detected
2-49 A400
that the ADF cover was open.
When scanning the fax, white or
black correction data for the first
2-50 A500
side CIS was not within the
correct range.
Although operation was retried
due to error A500 that occurred
while scanning the fax, white or
2-50 A600
black correction data for the first
side CIS was not within the
correct range.
Color parameter in the ROM
2-51 A700
does not match the first side CIS.
An error was detected in the
2-51 A800 color parameter in the ROM
during image processing.
A scanning error occurred while
2-51 A900
scanning the image.
2-52 AA00 An unidentified error occurred.
2-52 AB00 An unidentified error occurred.
When scanning the fax, white or
black correction data for the
2-52 AC00
second side CIS was not within
the correct range.
Image processing cannot be completed
correctly because the number of pixels
2-52 AD00 required for image processing is
insufficient in the scanned data for the
front side of the document.
2-52 AE00 An unidentified error occurred.
Home position is still being detected
2-52 AF00 even after the first side CIS for the
document scanner unit was moved.
2-21
Refer
Problem
2-53
2-53
2-54
2-54
2-55
2-55
2-55
2-56
2-56
2-56
2-56
2-56
2-57
2-57
2-57
2-57
Confidential
to: