Brother DCP-8110DN Service Manual page 204

(8) Remove the rubber keys C, R, and L from the control panel ASSY.
Rubber key R
Control panel ASSY
Positioning pins
Assembling Note:
• In the assembly procedure, be sure to attach the rubber keys L and R, and then
attach the rubber key C.
• Check that the holes on the rubber keys are engaged with the positioning pins.
(9) Remove the panel light guide and the caution lamp lens from the control panel ASSY.
Rubber key C
Positioning pins
Fig. 3-75
Caution lamp lens
Fig. 3-76
3-58
Positioning pins
Positioning pins
Positioning pins
Panel light guide
Control panel ASSY
Rubber key L
Positioning pin
Confidential