Brother DCP-8110DN Service Manual page 62

The number of drum rotations required for fuser unit warm-up operation (max.): 34.2.
Example: When fuser unit warm-up operation (max.) is performed before printing
Continuous pages printed
1 page
2 pages
18 pages
If both the warm-up operation after power ON or opening/closing cover and the fuser unit
warm-up operation (max.) are performed, the life of the drum unit becomes much shorter.
Note:
• The figures provided on this page are as of February 2012. These values are subject to
change without prior notice.
<How to reset drum counter>
Non touch panel models
(1) Press the [3] and [9] buttons
simultaneously in the ready state.
Reset Menu is displayed on the LCD.
(2) Press the [ ] or [
Drum Unit, and press the [OK] button.
" 1.Reset 2.Exit" is displayed on
the LCD.
(3) Press the [1] button. "Accepted" is
displayed on the LCD, and the
machine returns to the ready state.
Page count based on number of drum rotations (pages)
[34.2 + 12.2 + {3.8 x (1 - 1)}] / 15 = 3.1
[34.2 + 12.2 + {3.8 x (2 - 1)}] / 15 = 3.3
[34.2 + 12.2 + {3.8 x (18 - 1)}] / 15 = 7.4
Touch panel models
(1) Press the [3] and [9] buttons
] button to select (2) Press the [
(3) Press the [Yes] on the LCD.
(4) Press the [Stop/Exit] button, and the
2-17
simultaneously in the ready state.
Reset Menu is displayed on the LCD.
] or [ ] button to display
Drum Unit, and press the periodical
replacement part to be reset.
"Accepted" is displayed on the LCD,
and the display returns to the Reset
Menu.
machine returns to the ready state.
Confidential