Troubleshooting; Error Cause And Remedy - Brother HL-5440D Service Manual

4. TROUBLESHOOTING

4.1

Error Cause and Remedy

Error code 0B00
This error does not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
---
An unidentified error occurred.
Step
1 Main PCB failure
Error code 0C01/0C02/0C03/0C04
Log Access Error.
Log registration failed.
<User Check>
• Follow the User's Guide to set the network again.
Step
1 Main PCB failure
Error code 0D00
Storage Full
Data cannot be saved because storage data area in the memory is full.
<User Check>
• Print the Storage Print Data.
• Expand DIMM.
Step
1 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
Cause
Replace the main PCB ASSY.
2-28
Remedy
Remedy
Remedy
Confidential