Placing External Calls On Hold; Picking Up (Retrieving) A Held Call - Siemens optiset E standard Operating Instructions Manual

Calling Multiple Parties Simultaneously
Step by Step
Held on line: 801
or
Release
Program/Service
*
63=Retrieve lin e?
36

Placing External Calls on Hold

If you have programmed a key on your telephone as a
hold key Æ page 54, you can p lace external calls on
hold.
This enables all other parties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g . 801); make a note of the line number.
If a trunk key has been assigned, the LED flashes slow-
ly.
If applicable
Replace the handset or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.

Picking up (Retrieving) a Held Call

Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
or
If the "Line retrieved" key Æ page 54 has been config-
ured, press the key.
Enter the line number you noted earlier.
or
If a "Trunk key" was assigned to this line Æ page 54:
LED flashes slowly. Press the key.