Dialing A Number From The Internal Directory - Siemens optiset E standard Operating Instructions Manual

Making Calls to Stored Destinations
Step by Step
Speaker
Directo ry?
Scro ll Next?
Scro ll Previou s?
Delete Character?
Delete Line?
40
Dialing a Number From the Internal
Directory
The internal directory contains all station numbers and
system speed-dial numbers assigned to a name. Con-
t act System Support to find out if one was configured
for your system.
Precondition: Names have been assigned to the sta-
tion numbers stored in the system.
Lift the handset.
or
Press the key. The LED lights up.
Confirm.
The first entry is d isplayed on the screen.
To view further entries, confirm each sub sequent
d isplay.
or
Select and confirm.
or
Enter the name you want to find, or just the first few
letters, using the alphanumeric keypad.
You can use the keypad with the digits as an alphanu-
meric keypad in this case and enter the names by
p ressing the appropriate keys one or more times as
needed .
For example, you can enter the letter "R" by pressing the
"7" three times or the letter "E" by pressing the "3" twice.
The first name with the entered letters is displayed.
Enter the following letters by using the same method.
If no entry exists for the entered letters, you will hear a
short beep.
To enter a space, press the "0".
Pressing "1" automatically displays the first entry in the
internal directory.
The "
If applicable
Select and confirm each letter to b e deleted. The last
letter entered is deleted.
If applicable
Select and confirm. All entered letters are deleted, and
the first entry in the internal directory is displayed again.
"and "#" keys have no function here.
*