Placing External Calls On Hold; Picking Up (Retrieving) A Held Call - Siemens HiPath AllServe Operating Instructions Manual

Step by Step
Held on line: 801
or
Release
Program/Service
*
63=Retrieve lin e?

Placing External Calls on Hold

If you have programmed a key on your telephone as a
hold key Æ page 55, you can place external calls on
hold.
This enables all other par ties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has b een assigned, the LED flashes slow-
ly.
Replace the hand set or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.

Picking up (Retrieving) a Held Call

Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up
Select and confirm.
or
Enter the code.
or
If the "Line retrieved" key Æ page 55 has been config-
ured, press the key.
Enter the line number you noted earlier.
or
If a "T runk key" was assigned to this line Æ page 55:
LED flashes slowly. Press the key.
Calling Multiple Parties Simultaneously
37