Placing External Calls On Hold; Picking Up (Retrieving) A Held Call - Siemens HIPATH 3000 Operating Instructions Manual

Step by Step
Held on line: 801
If applicable
I
or
Release
Program/Service
*
63=Retrieve lin e?

Placing External Calls on Hold

If you have programmed a key on your telephone as a
hold key Æ page 55, you can place external calls on
hold.
This enables all other par ties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has b een assigned, the LED flashes slow-
ly.
Replace the hand set or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.

Picking up (Retrieving) a Held Call

Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
F?<
Enter the code.
or
If the "Line retrieved" key Æ page 55 has been config-
ured, press the key.
D
Enter the line number you noted earlier.
or
If a "T runk key" was assigned to this line Æ page 55:
LED flashes slowly. Press the key.
Calling Multiple Parties Simultaneously
37