Assigning A Procedure (Operating Steps) To A Key - Siemens optiset E standard Operating Instructions Manual

Step by Step
Program/Service
*
91=Prog. feature key?
US: Change feature?
UK: Change key?
P ro cedure key?
If necessary
Redial
US: Save en try?
UK: Save?
P reviou s?
Saving Station Numbers, Functions, Procedures and Appointments
Assigning a Procedure (Operating
Steps) to a Key
Station numbers and functions which require additional
inputs, i.e. comprise several operating steps, can be
saved to a single key on your telephone.
Using the associated dial function, for example
Æ page 30, you can save all the remaining inputs re-
quired (station number of the calling party + the station
number to be dialed) to a single key.
Station numbers which require add itional inputs but
also dial pauses can also be stored .
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
Press the key. If a function has already been assigned to
this key, a corresponding message is displayed.
Confirm.
Confirm.
Enter the procedure, e.g . "*67 231 089123456".
*67= code for associated dial
231= station number of the calling party
089123456 = number to be dialed.
To insert pauses, press this key (a "P" is displayed).
Confirm.
or If you make a mistake:
Select and confirm. This deletes all digits entered.
57