Call Waiting (Camp-On) - Siemens optiset E standard Operating Instructions Manual

If You Cannot Reach a Destination ...
Step by Step
Delete?
US: E xit?
UK: E nd?
Program/Service
Speaker
Camp-on
46
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
or
Press the key. The LED goes out.
or
Press the key. The LED goes out.

Call Waiting (Camp-On)

Precondition: You have dialed an internal number and
hear a busy signal. It is impor tant that you reach the
called par ty.
Wait (approx. 5 seconds) until "Camp-on" appears on the
d isplay and the busy tone is followed by the ring tone.
The called party can then respond Æ page 14
The called party can prevent automatic call
waiting Æ page 15.
If this feature is configured (contact System Sup-
port), you will hear the ring tone and the mes-
sage "Camp-on" is immediately displayed.