Placing External Calls On Hold - Siemens HIPATH 2000 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
Held on line: 801
t
or
Release
Program/Service
>
* 63=Retrieve line?
54

Placing External Calls on Hold

If you have programmed a key on your telephone as a
hold key
hold.
This enables all other parties to retrieve the call on the
assigned line.
Press the "US:Hold UK:Common Hold" key.
A message appears showing which line is on hold
(e.g. 801); make a note of the line number.
If a trunk key has been assigned, the LED flashes slow-
ly.
If applicable
Replace the handset or press the key.
Depending on your system configuration, this may be
necessary so other users can also pick up the held call.
Picking up (Retrieving) a Held Call
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
:
Select and confirm.
or
qjg
Enter the code.
or
If the "Line retrieved" key
ured, press the key.
o
Enter the line number you noted earlier.
or
If a "Trunk key" was assigned to this line
LED flashes slowly. Press the key.
Page 63, you can place external calls on
Page 63 has been config-
Page 63: