Parking A Call; Retrieving A Parked Call - Siemens optiset E standard Operating Instructions Manual

Step by Step
Transfer?
Program/Service
* 56=Park a call?
Program/Service
Retrieve call?
Replace the hand set.
or
Select and confirm.
If the connection between the t wo other parties
is not established within 45 seconds, the call
from the first part returns to you (recall).

Parking a Call

You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telep hone. This feature is useful if you
want to continue a call at another phone.
Precondition: You are conducting a call.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
... Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not d is-
played, it is already in use; enter another one.

Retrieving a Parked Call

Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
Select and confirm.
or
Enter the code.
... Enter the park slot number you noted earlier.
If the park slot numb er you enter is not in use, you can-
not retrieve the call.
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).
Calling Multiple Parties Simultaneously
35