Transferring A Call In Progress; Accepting A Call For Another Team Member; Joining Or Leaving A Group Call (Not For The Executive Telephone In An Executive/Secretary Team) - Siemens optiset E standard Operating Instructions Manual

Team and Executive/Secretary Functions With Trunk Keys
Step by Step

Transferring a Call in Progress

Press the DSS key and announce the call, if desired.
or Replace the hand set or press the key.
Release
Accepting a Call for Another Team
Member
Press the flashing DSS key or trunk key.
Lift the handset.
or
W ith on-hook dialing: Use speakerp hone mode.
Joining or Leaving a Group Call
(Not for the Executive Telephone in an
Executive/Secretary Team)
By default, your telephone rings when a call arrives on
your line.
If you want your phone to ring even when calls arrive on
other lines, you can turn your ringer on and off for each
line in your group Æ page 85.
Your telephone rings (one time only or every four sec-
onds) even when you are engaged in another call (atten-
tion ring volume Æ page 48).
83