Turning Do Not Disturb On And Off; Turning Ringer Cutoff On And Off - Siemens optiset E standard Operating Instructions Manual

Step by Step
DND on?
DND off?
or
Ringer cutoff on ?
Ringer cutoff off?
or

Turning Do Not Disturb On and Off

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (System Support).
Select and confirm.
or
or
Enter the code for "on" or "off".
When you lift the handset, a special dial tone
(continuous buzzing tone) reminds you that d o
not disturb is active.
Authorized internal callers can automatically
override the do not d isturb function after five sec-
onds.

Turning Ringer Cutoff On and Off

You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such as a trunk
key).
Select and confirm.
or
or
Enter the code for "on" or "off".
Making and Answering Calls
19