Labeling, Documentation And Accessories; Labeling Key Fields; Labeling Key Fields Using The Pc; Attaching A Station Number Label - Siemens optiset E standard Operating Instructions Manual

Labeling, Documentation and Accessories

Labeling, Documentation and Accessories

Labeling Key Fields

Key labeling sheets containing pre-cut cards are supplied with each tele-
phone and key module in an accessory pack. These cards can be used on
both sides, and are inserted into the telephone.

Labeling Key Fields Using the PC

If you have the user instructions for your HiPath 3000/HiPath AllServe on
CD Æ page 97, you can label keys conveniently at the PC.

Attaching a Station Number Label

A sheet with station number labels is supplied with each telephone.
Fill out the lab el (fire, police, your own station number) and punch it out.
Lift the handset and attach the label in the recess of the telephone.
96
If you are using the "dual key assignment" function Æ page 52, use
the back of the large card for labeling or assigning the two levels.
Use the plastic foil with the narrow strip s as a protective cover.
To label the fixed function keys
Æ page 3, p unch out the small pre-
p rinted labeling card. Insert the card
and cover it with the p lastic foil sup-
p lied (matt side up), as shown in the
d rawing.
Use one large card for labeling the
p rogrammable keys Æ page 3.
Punch out the card, write down the
stored functions and/or station
numbers (in the white area), inser t
it, and cover it with the plastic foil
supplied (matt side up), as shown in
the drawing.