Busy Override - Joining A Call In Progress - Siemens optiset E standard Operating Instructions Manual

If You Cannot Reach a Destination ...
Step by Step
Busy Override - Joining a Call in
Progress
This function is only available if it has been configured
by the service technician (contact System Sup port).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called part y.
Select and confirm.
Override?
or
Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
47