Add Binder - 3D Systems ZPRINTER 650 Quick Start Manual

8.2 Add Binder

If there is not enough binder in one or more of the cartridges,
ZPrint displays BINDER LOW
Important: Do not add binder unless you are prompted to in
the ZPrint Printer Status dialog.
To add binder, follow the steps below.
1. Pull the empty binder cartridge out of its housing on the
printer.
2. Get a new binder cartridge. Check the cartridge label for the
expiration date, and for the correct color and orientation.
Match the cartridge color to the color label on the printer.
3. Insert the cartridge into its housing with the color marking
on top. Ensure the cartridge is pushed all the way in. You
should feel it gently snap into place.
Important: If a cartridge does not snap into place, do not
force it. Check the orientation and that it is the correct color
and try again.
3dscentral.3dsystems.com
in the Printer Status dialog.
23