Program 100 - Plu Status Programming - Sam4s ER-5215M Operator's And Programming Manual

Program 100 - PLU Status Programming

96 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0, press the SBTL key.
1 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
 Press a PLU key on the keyboard or scan the item.
PLU
 If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key.
PLU PLU
 Enter the number of the PLU and press the PLU key.
 Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4. Refer to the "PLU Status Chart" to determine the values for N1 through N9. (If an
address offers more than one option, add the values for each option and enter the sum.
For example, if you wish the PLU to be taxable by rates 2 and 4, add the values for your
choices, 1 + 4, and enter the sum "5" for address N2.) Enter the values you have
selected, press the X/TIME key. (You do not need to enter preceding zeros. For
example, if you are only selecting a value for N9, just enter that value.)
N1 N2 N3
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
N4 N5 N6 N7
ER-5215M Electronic Cash Register v2.23
PLU
N8 N9 X/TIME