Receipt On Request; Training Mode; Clerk Interrupt - Sam4s ER-5215M Operator's And Programming Manual

Receipt on Request

If a customer requests a receipt after a sale has been finalized, a second depression of the CASH key
will issue a complete buffered receipt.
Note: A maximum of 204 items may be registered in one sale.

Training Mode

A training mode is available so that you can operate the cash register without updating totals and
counters. Note the following conditions:





To Enter Training Mode
To Exit Training Mode

Clerk Interrupt

Clerk interrupt allows you to temporarily suspend a transaction in progress by allowing a new clerk to
sign on and register a new transaction. After the new transaction is complete, the original clerk can
sign on, the suspended transaction is recalled and may be completed.
You must select either check (table) tracking or clerk interrupt. You cannot use clerk interrupt with a
check tracking system.
To Enable Clerk Interrupt
ER-5215M Electronic Cash Register v2.23
The receipt and journal print the message "TRAINING MODE BEGIN" when training
mode is activated.
The receipt and journal print the message "TRAINING MODE END" when training mode
is exited.
The message "TRAINING MODE" prints on each receipt printed while training mode is
active.
The journal does not print during training mode.
The total and counter on the financial report labeled "TRAIN TTL" is updated with the net
amount of each training transaction.
 Set system option #23 to a value of 1. See "System Option Programming".
 Set system option #23 to a value of 0. See "System Option Programming".
1. Program Clerk Secret Code
2. Set system option #2 to a value of 1. See "System Option Programming".
3. Set system option #26 to a value of 1. See "System Option Programming".
Operations • 47