Program 801 - Drawer Assignment; Program 810 - Clerk Descriptor Programming - Sam4s ER-5215M Operator's And Programming Manual

Program 801 - Drawer Assignment

Program 810 - Clerk Descriptor Programming

ER-5215M Electronic Cash Register v2.23
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
8 0 1
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter a drawer assignment (0 (no drawer), 1 (default), or 2); press the SBTL key.
Enter 0, 1 or 2
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
CASH
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
8 1 0
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter up to 18 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 104.)
Enter up to 18 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
SBTL
P-Mode Programming • 147