Program 250 - Plu Stock Amount Programming - Sam4s ER-5215M Operator's And Programming Manual

Program 250 - PLU Stock Amount Programming

With this program, you can you can add stock to the PLU sales counters for PLUs you have
designated as stock PLUs. See "Program 100 - PLU Status Programming" to set option N5 to set
stock status. The stock number set here can be the amount of stock that is being added to the current
level, or optionally, it can be the new total stock level. See option #18 in "System Option
Programming" to set this option.
102 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 2 5 0, press the SBTL key.
2 5 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
 Press a PLU key on the keyboard or scan the item.
PLU
 If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key.
PLU PLU
 Enter the number of the PLU and press the PLU key.
 Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
X/TIME
ER-5215M Electronic Cash Register v2.23
PLU