Function Key Assignment Programming - Sam4s ER-5215M Operator's And Programming Manual

Function Key Assignment Programming

Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as PREVIOUS BALANCE and SERVICE, which are not placed on the
default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL, for security
reasons.
Please note the following limitations:


To Assign a Function Key to a Location
82 • S-Mode Programming
If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
You can reassign keys only in locations that are programmable. See "Keyboards" on page
17, where the key locations that may be programmed are identified.
1. Turn the control lock to the S position.
2. Enter 7 0 and press the SBTL key.
7 SBTL
0
3. Refer to page 80 to find the code for the key you wish to assign. Enter the code and
press the location you wish to program. Repeat this step to assign another key.
Key Code
4. Press the CASH key to finalize key assignment programming.
CASH
Key
Location
ER-5215M Electronic Cash Register v2.23