Program 100 - Plu Status Programming - Sam4s ER-390M Operation And Program Manual

Program 100 - PLU Status Programming

PLUs default to Taxable by Rate 1. i.e GST
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 0 0, press the SBTL key.
1
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
•
Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
•
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
Enter the PLU#,
•
For a barcode item, scan the barcode.
4. Refer to the "PLU Status Chart" to determine the values for N1 through N9. (If an address
offers more than one option, add the values for each option and enter the sum. For example, if
you wish the PLU to be taxable by rates 1 and 3, add the values for your choices, 1 + 4, and
enter the sum "5" for address N5.) Enter the values you have selected, press the X/TIME key.
(You do not need to enter preceding zeros. For example, if you are only selecting a value
for N9, i.e. auto tare by number 1, just enter 1.)
Australian GST status is preset by default.
N1
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
ER-390M Electronic Cash Register AU
0 0 SBTL
PLU
PLU PLU
PLU
up to 15 digits
PLU
up to 15 digits
N2 N3 N4 N5
Enter the PLU#,
up to 15 digits
N6 N7 N8 N9
PLU
X/TIME
Program Mode Programming •91