Straight Percentage Tax Rate Programming - Sam4s ER-5215M Operator's And Programming Manual

Straight Percentage Tax Rate Programming

When tax requirements may be met using a straight percentage rate, use the following method to
program a tax as a straight percentage.
Programming Straight Percentage Tax Rates and Status
Tax Rate Programming Flowchart
92 • P-Mode Programming
1. Turn the control lock to the P position.
2. If the tax is a percentage rate, with a decimal. (0.000-99.999). It is not necessary to
enter preceding zeros. For example, for 6%, enter 06.000 or 6.000.
3. For the type of tax:
If the tax is a percentage added to the sale (normal add on tax), enter:
If the tax is a percentage value added tax (VAT; calculated as part of the
sale), enter:
4. Enter 0 here for all taxes, unless if you are programming tax 4 as a Canadian GST. If tax
4 is a Canadian GST, enter the sum of the options below:
OPTION
GST (tax 4) is taxable by rate 1?
GST (tax 4) is taxable by rate 2?
GST (tax 4) is taxable by rate 3?
5. Press the Tax Shift key for the tax you are programming.
6. Press the CASH key to end programming.
.
Tax Rate
You must enter decimal
=
TAX SHIFT
(1/2/3/4)
Tax
GST
type
tax
Info
ER-5215M Electronic Cash Register v2.23
0
2
VALUE SUM
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
CASH