Clerk Programming; Program 800 - Secret Code Programming - Sam4s ER-5215M Operator's And Programming Manual

Clerk Programming

Clerks (which may be used as cashiers), have the following programming options. These options are
set through separate programs:



Before attempting any programming, all clerks must first be signed off in REG mode.

Program 800 - Secret Code Programming

146 • P-Mode Programming
Program 800 - Secret Code programming determines the code that is used for clerk sign on
if a code entry sign on method is selected in system option #2 (See "System Option
Programming" on page 108.)
Program 801 - If a second cash drawer is installed, Drawer Assignment determines which
cash drawer will be opened for each.
Program 810 - Clerk Descriptor Programming allows you to set a unique, up to 18
character, descriptor for each clerk
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 0, press the SBTL key.
8 0 0
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter a secret code (up to 6 digits); press the SBTL key.
Enter the secret
code, up to 6
digits
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
CASH
SBTL
SBTL
ER-5215M Electronic Cash Register v2.23