Program 710 - Clerk Report Descriptor Programming - Sam4s ER-5215M Operator's And Programming Manual

Program 710 - Clerk Report Descriptor Programming

The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk Report
totals and counters. For example, the first total on the clerk report "NET SALES" might be re-labeled
to say "GROSS SALES". You can reprogram any of the Financial Report totals listed here with any
12-character descriptor.
154 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 7 1 0, press the SBTL key.
7 1 0
3. Refer to the chart on the next page and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
X
4. Enter up to 18 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 104.)
Enter up to 18 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
ER-5215M Electronic Cash Register v2.23