I Function Display - Icom IC-F510 Instruction Manual

1
PANEL DESCRIPTION

I Function display

qw e r t
q TRANSMIT INDICATOR
Appears while transmitting.
w RECEIVE INDICATOR
Appears when a signal is received, or the squelch is open.
e SIGNAL STRENGTH INDICATOR
Shows the relative signal strength while receiving signals.
r OUTPUT POWER INDICATOR
Appears when Low 2 or Low 1 is selected.
t AUDIBLE INDICATOR
➥ Appears when the channel is in the 'audible'
condition.
➥ Appears when the specific 5-tone/BIIS code is received.
y COMPANDER INDICATOR
Appears when the compander function is activated.
u SCRAMBLER INDICATOR
Appears when the voice scrambler function is activated.
• Optional UT-109/110 is required.
3
y u i o !0 !1
(unmute)
i BELL INDICATOR
Appears/blinks when the specific 5-tone/BIIS code is re-
ceived, according to the programming.
!2
o CALL CODE MEMORY INDICATOR
!3
Appears when the call code memory is selected.
!0 SCROLL INDICATOR
Appears when a received SDM including more than 10
characters is displayed.
!1 SDM INDICATOR
Appears when an SDM is received, or a transmit SDM is
selected.
!2 MULTI-FUNCTION INDICATOR
Shows the operating channel number and code simultane-
ously with the default setting.
The displayed information may differ according to the pro-
gramming.
!3 ACTIVATED KEY INDICATOR
Appears above the key assigned as the [DIGITAL] key
when that key has been activated.